Transport, storage

DANGER The unit may fall when using unauthorised transport equipment or lifting gear.

Bear in mind the weight (technical data, rating plate and centre of gravity (centre).
Observe the maximum permitted loading capacity for lifting gear and transport equipment.
Only attach the transport equipment to the 4 transport lugs (following figure) and secure sufficiently.
Do not stand under a suspended load.

CAUTION Risk of cuts from metal housing parts with sharp edges.

Wear personal protective equipment (cut-resistant gloves) for installation.

NOTICE Type and source of danger Damage to unit if the transport equipment is incorrectly attached.

Do not put sensitive components under strain, such as the impeller.

Use suitable ropes or chains for transport.
To ensure even weight distribution, the transport equipment must be hooked into all 4 transport lugs (see arrows in figure).
Lift the fan evenly and without jerky movements and set it down carefully at the installation site.

Storage

Only store the fan horizontally and in a dry place (at -10 °C to +60 °C). Avoid storage periods that are too long. Recommendation: store for a max. of 1 year. Before installing, check that the motor bearing is functioning properly.

Maico accepts no liability for corrosion damage caused by improper storage, e.g. storage in a damp room.