Wall

Use mounting material suitable for base and of sufficient dimensions. Ensure sufficient supply air.

The prescribed minimum distances to the wall and the ceiling shown in the figure must be observed.

 

  1. Make sure the housing has a level base.
  2. Fit wall breakthrough or drill core hole. Minimum diameter, 105 mm.

Recommendation: Fit WH 100 wall sleeve. Fit wall breakthrough with minimum diameter 115 mm.

Use ZM 11 mounting plate for rectangular wall breakthroughs.

  1. Lay power cable (flush-mounted) up to installation site, see above for spacing. Feed the power cable at least 110 mm out from the wall.