Deleting transmitters

Deleting an individual transmitter

If the send signal is faulty or can no longer be identified, it is possible that all transmitters must be deleted. The system components then have to be taught-in again. (This is recommended if a taught-in transmitter has been lost or is faulty.)

  1. To delete the transmitter (radio switch, radio window contact), repeat the teach-in procedure with the transmitter.

Deleting all transmitters

  1. Activate teach-in mode on the receiver fan. The button LED flashes. The teach-in mode is activated.
  2. Briefly press the teach-in button twice. The button LED flashes briefly twice and then goes out.