System components

ER EC 2.1 fan insert

Article no. 0084.0365

• Fan insert for installation in flush-mounted/surface-mounted housing. Flow rate 30 m³/h, 60 m³/h. In combination with an intelligent cover for the base load, also possible with 20 m³/h, 40 m³/h, 60 m³/h, or 100 m³/h and the full load 20 m³/h, 30 m³/h, 40 m³/h, 100 m³/h.
• Discharge adapter with air outlet facing upwards (factory setting).
• Discharge adapter with air outlet facing the rear (can be converted without tools).

ER-A cover

Article no. 0084.0361

• Standard model
• Flow rate 30 m³/h, 60 m³/h
• Installation and operating instructions for ER EC-Abdeckungen

ER-AK/-AK NFC cover

Article no. 0084.0362 / 0084.0460

• Comfort version with intelligent time module
• Flow rate 30 m³/h, 60 m³/h according to factory setting. Further flow rates that can be set:
  ER-AK Base load 20 m³/h, 30 m³/h, 40 m³/h, 60 m³/h or 100 m³/h, full load 20 m³/h, 30 m³/h, 40 m³/h, 60 m³/h or 100 m³
  ER-AK NFC Base load 15–100 m³/h, nominal load 15–100 m³/h in 5 m³/h increments
• Installation and operating instructions for ER EC-Abdeckungen

ER-AH/-AH NFC cover

Article no. 0084.0363 / 0084.0461

• Model with humidity control and intelligent time module
• Flow rate 30 m³/h, 60 m³/h according to factory setting. Further volumetric flows that can be set:
  ER-AH Base load 20 m³/h, 30 m³/h, 40 m³/h, nominal load 40 m³/h, 60 m³/h, 100 m³
  ER-AH NFC Base load 15–100 m³/h, nominal load 15–100 m³/h in 5 m³/h increments
• Installation and operating instructions for ER EC-Abdeckungen

ER-AB/-AB NFC cover

Article no. 0084.0364 / 0084.0462

• Model with motion detector and intelligent time module
• Flow rate 30 m³/h, 60 m³/h according to factory setting. Further volumetric flows that can be set:
  ER-AB Base load 20 m³/h, 30 m³/h, 40 m³/h, 60 m³/h, 100 m³/h, full load 20 m³/h, 30 m³/h, 40 m³/h, 60 m³/h, 100 m³
  ER-AB NFC Base load 15–100 m³/h, nominal load 15–100 m³/h in 5 m³/h increments
• Installation and operating instructions for ER EC-Abdeckungen