Installation instructions

• Surface mounting on the wall/ceiling or in suspended ceilings is permitted. Any installation position can be selected. Alternative installation in concrete or in the insulation layer under the screed.
• Take the bending radius of the flexible ducts into account when selecting the installation location.
• Ensure access to an inspection opening. Cover [4] must be removable.
• Connection of folded spiral-seams duct to connection socket [2] – permissible connection diameter DN 160 or DN 125.
• Only mount the air distributor in locations with sufficient load-bearing capacity. Sufficiently dimensioned mounting material is to be provided by the customer.
• Ensure that foreign bodies cannot be sucked into the air distributor and ducts.
• Only operate the air distributor when it is completely installed.
• Close unused air distributor openings with the supplied sealing plugs [5].