Teaching-in radio sensor

  1. Remove the front cover on the master unit.
  2. Switch the master unit (receiver) to teach-in mode. To do so, press the TEACH button on the master for 2 seconds. All 3 LEDs flash, teach-in mode is activated.
  3. Send a teach-in telegram with the radio sensor → Operating instructions of radio sensor. Once teaching-in has been successfully completed, TEACH mode is exited.
  4. Before putting on the front cover, the shutter must always be open. To do this, briefly switch on the master unit.
  5. Fit front cover on the master unit such that it locks into the safety catches.
  6. Run function test.

Teaching-in radio sensor on EnOcean extension module PP 45 EO:

When using a PP 45 EO, the teach-in/teach-out mode must be activated using the commissioning software or when in service mode. For detailed information → Commissioning instructions online.