Teaching in PP 45 ACT EnOcean radio switch

Read the installation and operating instructions of the PP 45 Act. Rocker switch(es) and frame cover are not included in the delivery. Use components from common switch ranges.

With the PP 45 ACT EnOcean radio switch, radio-controlled PP 45 RC PushPull units can be combined with wired exhaust air units (ECA, ER). The EnOcean actuator can be used as a normal light switch.

The wired exhaust air units (ECA, ER) are switched on at the push of a button. At the same time, a radio telegram is sent to the PP 45 RC master unit. The PP 45 RC units (master + slave) provide the required supply air at the exhaust air units.

The teaching-in of the PP 45 ACT on the PP 45 RC unit (master unit only) is carried out according to the teaching-in of a sensor.

In a master-slave configuration, both PP 45 RC units each supply 30 m³/h of supply air in the "Supply air for exhaust air units" function.

We therefore recommend using the PP 45 ACT only with two PP 45 RC radio-controlled units. The actuator only needs to be taught-in into the master unit.

Teaching-in PP 45 ACT on the PP 45 RC master unit

  1. Electrically connect PP 45 ACT → Installation instructions for final installation kit, connection diagrams in the appendix.
  2. Check the functions on the exhaust air fan. If these function correctly, switch off the exhaust air unit with the PP 45 ACT.
  3. Set PP45 RC master unit to teach-in mode.
  4. Press the T4 button once on the PP 45 ACT. The exhaust air unit switches on. The units are now taught-in to each other.
  5. Check the functions on the exhaust air fan. If these function correctly, switch off the exhaust air unit with the PP 45 ACT.