Parameter list, LEDs
LEDs – Meaning
LED flashes quickly, flashes slowly (dimmed), lights up
Vertical LEDs flash quickly = change air filter
The following list shows the parameters that can be set on the RLS 45 K control with the associated LED displays. Parameters shown in grey are without function on RV 2 units.
The following list shows the parameters that can be set on the RLS 45 K control with the associated LED displays.
Parameters shown with bold font = RV 2 parameters.
Par. | Function | LED
| LED
| LED
|
|---|---|---|---|---|
1 | Unit type on RLS (Fan1, Fan2). With RV 2 without function. |
|
|
|
2 | Number of unit pairs, unit types. With RV 2 without function. |
|
|
|
3 | Deactivating ventilation level 0 |
|
|
|
4 | Power units, RLS (on the RS 485 bus) |
|
|
|
5 | 230 VAC input |
|
|
|
6 | Sensors |
|
|
|
7 | EnOcean |
|
|
|
8 | EnOcean Teach mode. With RV 2 without function. |
|
|
|
9 | Number of PPB 30 K. |
|
|
|
10 | ModBus settings. ATTENTION: The ModBus interface must be deactivated for RV 2 units, otherwise the RV 2 cannot be controlled. |
|
|
|
11 | ModBus address. With RV 2 without function. |
|
|
|
12 | Plug & Play |
|
|
|
