Spare parts

Installation and removal of spare parts is only permitted by the specialist installer → Supplementary safety instructions.

Important information when ordering spare parts:

For inquiries, contact
Maico Elektroapparate-Fabrik GmbH
Steinbeisstraße 20
78056 Villingen-Schwenningen,
Deutschland
Tel. +49 7720 694 445
Fax +49 7720 694 175
E-mail: [email protected]

When replacing the main board (on the electronics slide-in module), the unit serial number must be assigned to the circuit board. The assignment is only possible with the commissioning software.

Observe the applicable regulations for electrical installations, e.g., DIN EN 50110-1 and DIN EN 60204-1, in Germany in particular VDE 0100 with the corresponding parts → in case of non-observance danger due to electric shock, fire or short circuit.

DANGER due to electric shock

Observe the safety rules of electrical engineering. Before taking off covers and before installing the electrics, shut down all supply circuits, switch off mains fuse, check that no voltage is present, secure against being accidentally switched back on and position a visible warning sign.

When retrofitting a bypass or preheating register, the components must be enabled via parameters (→ Unit settings menu, Basic settings) to ensure proper unit function.