Installation of the RLS 1 WR control unit

Observe the applicable regulations for electrical installations, e.g. DIN EN 50110-1 and DIN EN 60204-1, in Germany in particular VDE 0100 with the corresponding parts.

Installation conditions: Install a flush-mounted box at the installation location of the RLS 1 WR and guide in the connection cable.

  1. Remove cover of the RLS 1 WR.
  2. Connect the connection cable to the RLS 1 WR → Wiring diagrams.
  3. Use 2 screws to secure the RLS 1 WR to the flush-mounted box.
  4. Fit cover of the RLS 1 WR.