Installation of ventilation unit, electrical connection
The power cable is already wired inside the unit and led out of the ventilation unit. The control cable of the RLS 1 WR control unit (alternatively RLS T2 WS) is led into the ventilation unit and wired on the main board of the electronics slide-in module.
Observe the supplementary safety instructions.
WARNING Serious injuries if the ventilation unit is not mounted correctly or if the front cover falls down. Injuries and contusions to the head and limbs.
Ensure that the ventilation unit and the front cover are fastened properly. Secure in working area. Wear a hard hat.
Danger of falling when working at heights. Serious injuries in the event of a fall. Danger to persons below the ladder from falling objects.
When working at heights, use suitable ladders/climbing aids and ensure that they are stable. Work in pairs and ensure that you are standing securely and cannot lose your balance and that there is no one under the work area. Protect yourself against falling. Protect the ladder against bumping, knocking over and tipping.