Installation of the RLS 1 WR control unit

Observe the applicable regulations for electrical installations, e.g. DIN EN 50110-1 and DIN EN 60204-1, in Germany in particular VDE 0100 with the corresponding parts.

DANGER due to electric shock

Observe the safety rules of electrical engineering. Before taking off covers and before installing the electrics, shut down all supply circuits, switch off mains fuse, check that no voltage is present, secure against being accidentally switched back on and position a visible warning sign.

Installation conditions: Install a flush-mounted box at the installation location of the RLS 1 WR and guide in the connection cable.

  1. Remove cover of the RLS 1 WR.
  2. Connect the connection cable to the RLS 1 WR → Wiring diagrams.
  3. Use 2 screws to secure the RLS 1 WR to the flush-mounted box.
  4. Fit cover of the RLS 1 WR.