Installation with RS 20.. / ..45 shutter

  1. Screw the deflector nozzle (RS accessory) to the guide plate [8] using screws [6].
  2. Screw the guide plate to the connection frame [1] using screws [6].
  3. Position the connection frame on the wall, mark and drill the hole (Ø 18 mm) for the guide tube.
  4. Attach the 2nd deflector nozzle to the interior wall.
  5. Cut the guide tube [7] to length according to the table and insert it into the hole from the outside up to the deflector nozzle.

Type

Tube length [7]

RS 20

33 millimeters

RS 25

46 millimeters

RS 30

61 millimeters

RS 35

78 millimeters

RS 40

88 millimeters

RS 45

96 millimeters

  1. Screw the bracket [9] onto the guide plate [8] using screws [5].
  2. Guide the pull cord through the guide tube [7] and connect it to the manual switch or servomotor.

When installing the Maico servomotor MS 2, keep the length of the pull cord as short as possible to avoid changes in length due to stretching.