Axial duct fan

DZR 30/6 B Ex e

Article number: 0086.0703
Manufacturer: MAICO
Axial duct fan, DN 300, three-phase AC, explosion proof
Application examples: Environment with explosion hazard (zone 1 and 2), Workshop, Storage facility, Laboratory, Workplace air extraction system
DZR 30/6 B Ex e IM0009991.PNG Axial duct fan, DN 300, three-phase AC, explosion proof
DZR 30/6 B Ex e IM0017898.PNG Axial duct fan, DN 300, three-phase AC, explosion proof

Characteristic curve

DZR 30/6 B Ex e - Characteristic curve

  • DZR 30/6 B Ex e IM0001411.PNG Axial duct fan, DN 300, three-phase AC, explosion proof

Dimensioned drawing

DZR 30/6 B Ex e - Dimensioned drawing [mm]

  • DZR 30/6 B Ex e IM0001412.PNG Axial duct fan, DN 300, three-phase AC, explosion proof

Number of flange holes: 8

Technical data

DZR 30/6 B Ex e - Technical data

Article DZR 30/6 B Ex e
Air flow volume 1.130 m³/h
Rotating speed 985 1/min
Impeller type axial
Speed controllable
Reversing capacity
Type of voltage Three-phase AC
Rated voltage 400 V
Frequency 50 Hz
Nominal output 25 W
cosφ 0,27
Inom 0,12 A
Imax at UNominal 0,13 A
Degree of protection IP 54
Insulation class F
Installation position vertical / horizontal
Housing material Sheet steel, galvanised
Weight 11,8 kg
Nominal size 300 mm
Width 424 mm
Height 424 mm
Depth 300 mm
EX designation in accordance with the ATEX Directive Ex II 2 G
EX designation in accordance with standard Ex e IIB + H2 T4 Gb
Ta ambient temperature -20 °C ≤ Ta ≤ +40 °C
IA/IN 3,4
Time tA 1390 sek
Operating mode S1
PTC DIN 44082 M 80
EC type examination certificate EX5 03 06 39250 007
Temperature class T4
Temperature class of insulating materials Th. Cl. 155 (F)
Packing unit 1 piece
Range C
GTIN (EAN) 4012799867036
Article number 0086.0703

 

63 Hz

125 Hz

250 Hz

500 Hz

1 kHz

2 kHz

4 kHz

8 kHz

Total

LWA5, high (dB(A))

58

LWA5= free inlet sound power level in dB.

Product description

Productdescription

DZR 30/6 B Ex e

short description

Axial duct fan, DN 300, three-phase AC, explosion proof

Product description

Features

  • Explosion protection in accordance with ATEX.
  • Ex II 2G Ex e IIB+H2 T3/T4 Gb.
  • For usage temperatures of -20°C ≤ Ta ≤ +40°C.
  • MAICO Ex fans fulfil the safety requirements of European Directive 2014/34/EU for units and protective systems in explosion-endangered areas.
  • For zone 1 and 2.
  • Duct sleeve made of galvanised sheet steel, with flanges on both sides.
  • Can be fitted in any position.
  • Can be switched to ventilation or air extraction.
  • Reversing mode: The volumetric flow is reduced by approx. 35 % with abnormal air flow direction.

Motor

  • Robust motor with ball bearings, maintenance-free.
  • Motor protection class IP 54.

Electrical connection

  • Separate terminal box, explosion proof, with cable screw-connections.

Required safety technology

  • A PTC thermistor triggering device is needed to fuse the DZR-Ex e units.
  • Maico provides the MVS 6 PTC thermistor triggering device and TMS for this purpose.
  • MVS 6 PTC thermistor triggering device
    • Independent complete system.
    • For monitoring the maximum motor temperature.
    • Type-examination tested according to Directive 2014/34/EU (ATEX).
    • Installation exclusively in non-explosive areas.
  • TMS PTC thermistor triggering device
    • For monitoring the maximum motor temperature.
    • Suitable for installation in control cabinets.
    • Type-examination tested according to Directive 2014/34/EU (ATEX).
    • Installation exclusively in non-explosive areas.

Safety instructions

  • Speed control permitted with transformer TR.... Exception: DZ.. 35/2 B Ex e
  • The temperature in the fan unit is monitored by PTC thermistors. The PTC thermistors must be connected to a triggering system (safety device according to Directive 2014/34/EU), that separates the fan permanently from the power if the temperature gets too hot.
  • The MAICO PTC thermistor triggering device MVS 6 or TMS is recommended as the triggering system.
  • The fan may be operated only if the protection against accidental contact with the impeller is guaranteed to be in accordance with DIN EN ISO 13857 for fans with free inlet and outlet, e.g. with an SG protective grille.

Special versions

  • Special voltages are available on request, at an extra cost.
  • Information on operation at temperatures occasionally below -20°C available upon request.
  • Feasibility must be checked in each case.

Table of contents

Wiring diagram

DZR 30/6 B Ex e - Wiring diagram



Predecessor - successor

DZR 30/6 B Ex e - Predecessor

Product typeNameArt. No.Action
Axial duct fanDZR 30/6 A-ExNo longer available for delivery0086.0765
  • On the notes

Notes
Inquiry
Product comparison
The wish list option allows you to make a note of all the products you are interested in. You can change your wish list as often as you want to. You can change the quantity and item position of the products, go back to the product page, download product data sheets, delete items and mark products as optional. You can save your wish list to your computer and then call it up again at a later time to make more changes, if required. Using the list, you can then download the tender text for all the products you have saved to the list, create an enquiry or compare products.
Assort Product type Name Art. No. PDF Range List price* (EUR) Quantity Optional Total gross amount (EUR)
There are no products on the list
Save wish list on local computer
Load wish list from local computer

Search

Here you can search for products, documents, contents pages etc.

Our website uses cookies in order to provide you an optimal service. Agreed

Acknowledgements Data protection