Characteristic curve
Dimensioned drawing
ERR 31/1 - Dimensioned drawing [mm]
Technical data
ERR 31/1 - Technical data
Accessories
ERR 31/1 - Accessories
Specific accessories
| Product type | Name | Art. No. | Price*(EUR) | Action |
|---|---|---|---|---|
| Fixing cuff | ELR 31 | 0092.0114 | on request | |
| Mounting foot | FUR 31/1 | 0036.0089 | on request |
General accessories
Product description
Productdescription
ERR 31/1
short description
Centrifugal duct fan, DN 315, alternating currentProduct description
Features
- Centrifugal impeller with backwards curved blades.
- Inlet and outlet side connection couplings for direct installation in ventilation ducts.
- Mounting foot available as accessory.
Air flow direction
- Airstream and rotational directions are indicated by arrows marked on the fan housing
Motor
- External rotor - capacitor motor.
- Operating capacitor in the terminal box is ready to be connected.
- Speed controllable.
- Thermal overload protection as standard feature.
- Robust motor with ball bearings, maintenance-free.
- IP X4 degree of protection when installed in ventilation ducts with at least 1 m of duct on the inlet and outlet sides.
Mounting instructions
- Can be fitted in any position.
- Use ELR flexible cuffs to prevent transfer of vibrations onto the duct system.
Electrical connection
- Externally fitted terminal box with cable guide bushes.
Safety instructions
- The fan may be operated only if the protection against accidental contact with the impeller is guaranteed to be in accordance with DIN EN ISO 13857 for fans with free inlet or outlet. To do this, fit a SGR protective grille.
Wiring diagram
ERR 31/1 - Wiring diagram
ERH... electric air heater with LW 9 air flow monitor and ST speed controller
K1 - heating release (US16T)
ERR .. / 1 - centrifugal fan
LW 9 - air flow monitor
ETL 16 P - electronic temperature controller
DTL 16 P - electronic temperature controller
FL 30P channel sensor
ST.. STU.., STS.. speed controller
ERH - electric air heater
F1 - temperature limiter
F2 - safety temperature limiter
N - night reduction
- Only with DTL 16 P
Centrifugal fan
Centrifugal fan with ST/STU/STS speed controller
Centrifugal fan with TRE 5-step transformer
Duct fan with ERH 16-2 R electric air heater
S1 - system on
US16 - all-pole isolating switch (contactor)
ERR... centrifugal duct fan
ERH...R electrical air heater: ERH16-2R
B=Int/ext bridge must be closed
C=Do not change potentiometer setting
D=Setpoint potentiometer for MIN limitation
E=Setpoint potentiometer for MAX limitation
F=Bridge for MAX limitation, bridge must be closed!
G=If bridge is closed, MIN limitation is also active
FR30P - ext. setpoint controller (0-30°C) with room sensor
FL30P - ext. channel sensor for MIN, MAX limitation
LW9 - air flow monitor (in position N)
Installation of LW9 sensor on incoming side of air heater
0-30°C setpoint setting and recording of room temperature with FR30P
0-60°C min/max limitation in supply air channel with FL60P
Duct fan with electric air heater DRH 16-5R and DRH 20-6R
S1 - system on
US16 - all-pole isolating switch (contactor)
ERR... centrifugal duct fan
DRH...R electric air heater: DRH16-2R or DRH20-6R
B=Int/ext bridge must be closed
C=Do not change potentiometer setting
D=Setpoint potentiometer for MIN limitation
E=Setpoint potentiometer for MAX limitation
F=Bridge for MAX limitation, bridge must be closed!
G=If bridge is closed, MIN limitation is also active
FR30P - ext. setpoint controller (0-30°C) with room sensor
FL30P - ext. channel sensor for MIN, MAX limitation
LW9 - air flow monitor (in position N)
Installation of LW9 sensor on incoming side of air heater
0-30°C setpoint setting and recording of room temperature with FR30P
0-60°C min/max limitation in supply air channel with FL60P
Duct fan with DRH 25-9R, DRH 31-12R, DRH 35-12R and DRH 40-12R electric air heaters
S1 - system on
S - sensor
US16 - all-pole isolating switch (contactor)
ERR... centrifugal duct fan
DRH...R electric air heater: DRH 25-9R, DRH 31-12R, DRH 35-12R, DRH 40-12R
B=Int/ext bridge must be closed
C=Do not change potentiometer setting
D=Setpoint potentiometer for MIN limitation
E=Setpoint potentiometer for MAX limitation
F=Bridge for MAX limitation, bridge must be closed!
G=If bridge is closed, MIN limitation is also active
FR30P - ext. setpoint controller (0-30°C) with room sensor
FL60P - ext. channel sensor for MIN, MAX limitation
LW9 - air flow monitor (in position N)
Installation of LW9 sensor on incoming side of air heater
0-30°C setpoint setting and recording of room temperature with FR30P
0-60°C min/max limitation in supply air channel with FL60P
Downloads
ERR 31/1 - Downloads
Predecessor - successor
The wish list option allows you to make a note of all the products you are interested in.
You can change your wish list as often as you want to. You can change the quantity and item position of the products, go back to the product page, download product data sheets, delete items and mark products as optional.
You can save your wish list to your computer and then call it up again at a later time to make more changes, if required.
Using the list, you can then download the tender text for all the products you have saved to the list, create an enquiry or compare products.