Final assembly kit

PP 45 RC

Article number: 0095.0242
Manufacturer: MAICO
Final installation kit for PushPull 45 K single-room ventilation unit with heat recovery, comprising fan,... more information

Product data sheet
PP 45 RC IM0017236.PNG Final installation kit for PushPull 45 K single-room ventilation unit with heat recovery, comprising fan, ceramic heat exchanger, internal cover with manual shutter, 1 x ISO Coarse 30 % (G2) filter and 1 x ISO Coarse 45 % (G3) filter, version: with radio control and electric shutter, accessories required: shell sleeve, external cover or soffit element and DS 45 RC radio switch, optional accessories: wall block, sensors, power unit, EnOcean actuator and, as alternative to the DS 45 RC radio switch, the combination of RLS 45 K room air control with EnOcean extension module PP 45
PP 45 RC IM0020196.PNG Final installation kit for PushPull 45 K single-room ventilation unit with heat recovery, comprising fan, ceramic heat exchanger, internal cover with manual shutter, 1 x ISO Coarse 30 % (G2) filter and 1 x ISO Coarse 45 % (G3) filter, version: with radio control and electric shutter, accessories required: shell sleeve, external cover or soffit element and DS 45 RC radio switch, optional accessories: wall block, sensors, power unit, EnOcean actuator and, as alternative to the DS 45 RC radio switch, the combination of RLS 45 K room air control with EnOcean extension module PP 45
PP 45 RC IM0019953.PNG Final installation kit for PushPull 45 K single-room ventilation unit with heat recovery, comprising fan, ceramic heat exchanger, internal cover with manual shutter, 1 x ISO Coarse 30 % (G2) filter and 1 x ISO Coarse 45 % (G3) filter, version: with radio control and electric shutter, accessories required: shell sleeve, external cover or soffit element and DS 45 RC radio switch, optional accessories: wall block, sensors, power unit, EnOcean actuator and, as alternative to the DS 45 RC radio switch, the combination of RLS 45 K room air control with EnOcean extension module PP 45
PP 45 RC IM0013942.PNG Final installation kit for PushPull 45 K single-room ventilation unit with heat recovery, comprising fan, ceramic heat exchanger, internal cover with manual shutter, 1 x ISO Coarse 30 % (G2) filter and 1 x ISO Coarse 45 % (G3) filter, version: with radio control and electric shutter, accessories required: shell sleeve, external cover or soffit element and DS 45 RC radio switch, optional accessories: wall block, sensors, power unit, EnOcean actuator and, as alternative to the DS 45 RC radio switch, the combination of RLS 45 K room air control with EnOcean extension module PP 45
PP 45 RC IM0007254.PNG Final installation kit for PushPull 45 K single-room ventilation unit with heat recovery, comprising fan, ceramic heat exchanger, internal cover with manual shutter, 1 x ISO Coarse 30 % (G2) filter and 1 x ISO Coarse 45 % (G3) filter, version: with radio control and electric shutter, accessories required: shell sleeve, external cover or soffit element and DS 45 RC radio switch, optional accessories: wall block, sensors, power unit, EnOcean actuator and, as alternative to the DS 45 RC radio switch, the combination of RLS 45 K room air control with EnOcean extension module PP 45
Back
  • On the notes
PP 45 K
PP 45 O
PP 45 RC

Characteristic curve

Dimensioned drawing

PP 45 RC - Dimensioned drawing [mm]

  1. Cable feedthrough

Technical data

PP 45 RC - Technical data

Article PP 45 RC
Model Wireless version, electric shutter
Air flow volume 15 m³/h / 20 m³/h / 30 m³/h / 36 m³/h / 42 m³/h
SEC average -39,37 kWh/(m²*a)
Energy efficiency class A+
Rated voltage 230 V
SPI value in accordance with DIN EN 13141-8 0,12 Wh/m³
Maximum power consumption 1,2 W / 1,7 W / 2,1 W / 2,8 W / 3,5 W
Degree of protection IP 00
DIBT approval yes
Installation position horizontal
System type Decentralised
Material Synthetic material
Housing material Synthetic material
Heat exchanger material Ceramic
Colour Traffic white, similar to RAL 9016
Weight 3,18 kg
Weight including packaging 3,92 kg
Type of filter Outside and exhaust air filter
Filter class ISO Coarse 30 % (G2) / ISO Coarse 45 % (G3)
Connection diameter 160 mm
Width 246 mm
Height 246 mm
Depth 282 mm
Width with packaging 260 mm
Height with packaging 247 mm
Depth with packaging 300 mm
Wall has to be broken through 162 to 182 mm
Degree of heat provision with reference volumetric flow according to DIN EN 13141-8 84,3 %
Required room air control DS 45 RC or RLS 45 K with PP 45 EO
Sound pressure level 21 dB(A) / 25 dB(A) / 31 dB(A) / 35 dB(A) / 38 dB(A) / Distance 1 m, free-field conditions
Rated max. element normal difference in noise level Dn,w 51 dB / measured with PP 45 LE and shutter closed; 51 dB measured with PP45 AE, 2x PP45 SE, shutter closed; 46 dB measured with PP45 LE, PP45 LEW90, shutter open
Approval number Z-51.3-416
Packing unit 1 piece
Range K
GTIN (EAN) 4012799952428
Article number 0095.0242

Product description

Productdescription

PP 45 RC

short description

Final installation kit for PushPull 45 K single-room ventilation unit with heat recovery, comprising fan, ceramic heat exchanger, internal cover with manual shutter, 1 x ISO Coarse 30 % (G2) filter and 1 x ISO Coarse 45 % (G3) filter, version: with radio control and electric shutter, accessories required: shell sleeve, external cover or soffit element and DS 45 RC radio switch, optional accessories: wall block, sensors, power unit, EnOcean actuator and, as alternative to the DS 45 RC radio switch, the combination of RLS 45 K room air control with EnOcean extension module PP 45

Product description

Model

  • With radio control.
  • With electric shutter.

Optional accessories

  • PP 45 MB wall block
  • PP 45 LT power unit
  • PP 45 EO EnOcean extension module
  • PP 45 ACT EnOcean actuator
  • PP 45 HYI and PP 45 HY humidity sensor
  • PP 45 CO2 CO2 sensor
  • PP 45 VOC sensor
  • Air filter, PP 45 G2, PP 45 G3 and PP 45 G2P replacement

Approvals and certificates

  • DIBt approval Z-51.3-416.
  • Test report in accordance with EN 13141-8.
  • Entry in TZWL bulletin.

Heat exchanger

  • Thanks to the high-performance heat exchanger and high-efficiency EC fan, the units achieve a degree of heat provision of 84.3 % at reference volumetric flow according to EN 13141-8.

Installation instructions

  • Mounting involves 2 steps:
    • Installation of the PP 45 RHK (DN 160) or PP 45 RHL (DN 160) shell sleeve and an external cover in a DN 160 core drill hole with an inclination of 1-2 %.
    • We recommend drilling a DN 182 core hole and using the polystyrene shims provided to align the inclination of the sleeve.
    • The shell sleeve is protected from contamination by plaster protective covers.
    • Then the final assembly kit is integrated.
    • No ducts have to be laid and the system does not have to be adjusted.

Electrical connection

  • When delivered, the unit is assembled and ready for service.
  • The electrical connection is made using a plug connection.
  • Connection to RLS 45 K or RLS 45 O room air control using pluggable control cables.
  • The 12 VDC power cable of the RLS 45 K / RLS 45 O room air control to the unit is also the control cable.

Condensation drain

  • The condensate is removed via an integrated condensation drip edge in the external cover.

Special features

  • With PP 45 O/K units, a complete ventilation system can be set up in accordance with DIN 1946-6, including integration of the exhaust air units via a central control system (RLS 45 K).
  • The PP 45 O/K/RC unit series is the quietest unit series on the market and is impressive with the sound pressure level values (per ventilation level and a distance of 1 m): 21 dB(A) / 25 dB(A) / 31 dB(A) / 35 dB(A) / 38 dB(A).
  • The energy efficiency of two units + control is impressive with an SPI value of 0.11 Wh/m³.
  • Due to the very quiet and energy-saving motors, a very good sensor-guided operation, the devices achieve the energy efficiency class of A+.
  • The PP 45 K and PP 45 RC unit versions have an electric shutter. If the units are switched off (level 0), the shutter closes automatically. The unit does not consume electricity in the process.
  • The duct mounting can be removed, without tools, for cleaning purposes and filter replacement. The two filters can also be changed without tools.
  • The heat exchanger can also be removed for cleaning purposes with the aid of a tool.
  • The units can be operated in 5 different ventilation levels 15/20/30/36/42 m³/h and in 3 operating programs – continuous ventilation with heat recovery, cross-ventilation and sensor-guided automatic operation.
  • Clear commissioning software, when using the RLS 45 K control system, facilitates the commissioning of the PP 45 O/K units. The settings can be stored as a profile and transferred to other controllers.
  • Flow-optimised external covers in the accessories range keep the exhaust air away from the external façade.

Features

  • Final installation kits for PushPull 45 single-room ventilation unit with fan, ceramic heat exchanger, internal cover and two integrated filters (ISO Coarse 30 % (G2) and ISO Coarse 45 % (G3)) such that the air is filtered in both directions.
  • Models:
    • PP 45 K – with electric shutter.
    • PP 45 O – with manual shutter.
    • PP 45 RC – with radio control and electric shutter.
  • To achieve efficient ventilation, we would recommend operating the units in pairs.
  • In certain system combinations, an odd number of units is also possible.

Required accessories

  • PP 45 RHK or PP 45 RHL shell sleeve
  • PP 45 AK, PP 45 AE or PP 45 AW external cover for external wall mounting or PP 45 LE soffit element for soffit channel mounting
  • RLS 45 K or RLS 45 O room air control for the PP 45 K and PP 45 O final installation kits and DS 45 RC radio switch for the PP 45 RC radio unit
  • Up to a maximum of 6 units can be controlled at the same time through an RLS 45 K or RLS 45 O room air control.
  • If using the DS 45 RC radio switch, there is no limit on the number of units provided that they are within range of the radio switches.

Optional accessories

  • PP 45 MB wall block
  • PP 45 LT power unit
  • PP 45 EO EnOcean extension module
  • PP 45 ACT EnOcean actuator
  • PP 45 HYI and PP 45 HY humidity sensor
  • PP 45 CO2 CO2 sensor
  • PP 45 VOC sensor
  • Air filter, PP 45 G2, PP 45 G3 and PP 45 G2P replacement

Table of contents

Wiring diagram

PP 45 RC - Wiring diagram

PP 45 RC - ventilation unit PP 45 RC

W1 - Mains connection cable, max. permissible cable cross-section = 1.5mm². Recommended cable type: NYM-J 3x1.5mm³.



Predecessor - successor

Notes
Inquiry
Product comparison
The wish list option allows you to make a note of all the products you are interested in. You can change your wish list as often as you want to. You can change the quantity and item position of the products, go back to the product page, download product data sheets, delete items and mark products as optional. You can save your wish list to your computer and then call it up again at a later time to make more changes, if required. Using the list, you can then download the tender text for all the products you have saved to the list, create an enquiry or compare products.
Assort Product type Name Art. No. PDF Range List price* (EUR) Quantity Optional Total gross amount (EUR)
There are no products on the list
Save wish list on local computer
Load wish list from local computer

On this website, technologies such as cookies and measurements of reach (targeting and tracking) are used (services). This means that personal information such as the IP address and browser information is processed to continuously improve our website as well as to display to you customised content that corresponds to your individual interests. You may of course influence the use of this information through the settings you choose. The settings you have chosen are stored in a necessary selection cookie. With the exception of the selection cookie mentioned above, technically non-essential cookies and measurements of reach are only used if you provide permission in advance by clicking “ACCEPT ALL AND CLOSE”. Details and options for customising your consent can be found under Data protection settings.

Here you can select a variety of different categories of services or cookies. By activating the corresponding “Statistics & analytics” checkbox and confirming “Save settings”, you can give your informed consent to the use of cookies for customisation purposes. At the bottom of the website under “Data protection settings”, you can change or revoke your consent and settings for the individual services at any time with effect for the future.

Necessary cookies are absolutely necessary for the operation of the website. Without these cookies, the website would not function properly.

These cookies and services collect and process data for statistics and analytics and thus enable further improvements of this website for users. Google Analytics and Google Adwords Conversion are used for this purpose. You will find a detailed description of such use in our Privacy Policy.

Save settings ACCEPT ALL AND CLOSE Data protection settings
Data protection