Heat recovery unit

WRG 20-1

No longer available for delivery
Article number: 0082.0226
Manufacturer: MAICO
Heat recovery unit for wall installation

Product data sheet
WRG 20-1 IM0022794.PNG Heat recovery unit for wall installation

Characteristic curve

Dimensioned drawing

WRG 20-1 - Dimensioned drawing [mm]

  1. Recessed cable entry.
  2. Required window cut-out or wall breakthrough is 295 mm.

Technical data

WRG 20-1 - Technical data

Article WRG 20-1
Air flow volume 100 m³/h
Rotating speed 1.320 1/min
Speed controllable
Rated voltage 230 V
Power consumption 35 W
Imax 0,2 A
Degree of protection IP 44
Installation site Wall
Material Synthetic material
Colour Traffic white, similar to RAL 9016
Weight 5,08
Weight including packaging 5,08 kg
Width with packaging 360 mm
Height with packaging 160 mm
Depth with packaging 490 mm
Airstream temperature at IMax 40 °C
Heat recovery rate 50 %
Packing unit 1 piece
Range D
GTIN (EAN) 4012799822264
Article number 0082.0226

 

63 Hz

125 Hz

250 Hz

500 Hz

1 kHz

2 kHz

4 kHz

8 kHz

Total

LWA7, high (dB(A))

54

LWA7= housing and free inlet sound power level in dB.

Accessories

WRG 20-1 - Accessories

Specific accessories

Product type Name Art. No. Price*(EUR) Action
Replacement heat exchanger rings WRF 20 0093.0347 on request
  • On the notes

General accessories

Product type Name Art. No. Price*(EUR) Action
Step switch FS 4 0016.0104 on request
  • On the notes

Product description

Productdescription

WRG 20-1

short description

Heat recovery unit for wall installation

Product description

Features

  • Thermal heat recovery rate approx. 50 % supply air is heated by heat recovery from the exhaust air flow.
  • Not suitable for use in humid areas.
  • Not suitable for use in bedrooms.
  • Simultaneous ventilation and air extraction.
  • Centrifugal capillary impeller.
  • Heat exchanger ring with filter effect for supply and exhaust air, easy to clean and to replace.
  • Installation of an additional switch enables air extraction without heat recovery.
  • Plastic housing.
  • With operating indicator light.
  • Depth of outer part is only 22 mm. Therefore no conflict with shutters or blinds.
  • Safety shutdown when the housing is removed.
  • VDE-GS tested.

Motor

  • Robust motor with ball bearings, maintenance-free.
  • Suitable for continuous operation.
  • Thermal overload protection as standard feature. Switches motor off under thermal overload and comes on automatically again after cooling down.

Special versions

  • The following special models are available at extra cost on request:
  • Longer wall sleeves for walls up to 1.0 m thick.
  • Feasibility must be checked in each case.

Table of contents

Wiring diagram

WRG 20-1 - Wiring diagram

S1 fan On/Off, to be supplied by the customer

S2 supply air shutter opening/closing, to be supplied by the customer

S4, S5 safety limit switch

Z1 supply air shutter

M1 fan



Predecessor - successor

WRG 20-1 - Successor

Product type Name Art. No. Action
Final assembly kit WRG 35-SE No longer available for delivery 0082.0233
  • On the notes

Notes
Inquiry
Product comparison
The wish list option allows you to make a note of all the products you are interested in. You can change your wish list as often as you want to. You can change the quantity and item position of the products, go back to the product page, download product data sheets, delete items and mark products as optional. You can save your wish list to your computer and then call it up again at a later time to make more changes, if required. Using the list, you can then download the tender text for all the products you have saved to the list, create an enquiry or compare products.
Assort Product type Name Art. No. PDF Range List price* (EUR) Quantity Optional Total gross amount (EUR)
There are no products on the list
Save wish list on local computer
Load wish list from local computer

On this website, technologies such as cookies and measurements of reach (targeting and tracking) are used (services). This means that personal information such as the IP address and browser information is processed to continuously improve our website as well as to display to you customised content that corresponds to your individual interests. You may of course influence the use of this information through the settings you choose. The settings you have chosen are stored in a necessary selection cookie. With the exception of the selection cookie mentioned above, technically non-essential cookies and measurements of reach are only used if you provide permission in advance by clicking “ACCEPT ALL AND CLOSE”. Details and options for customising your consent can be found under Data protection settings.

Here you can select a variety of different categories of services or cookies. By activating the corresponding “Statistics & analytics” checkbox and confirming “Save settings”, you can give your informed consent to the use of cookies for customisation purposes. At the bottom of the website under “Data protection settings”, you can change or revoke your consent and settings for the individual services at any time with effect for the future.

Necessary cookies are absolutely necessary for the operation of the website. Without these cookies, the website would not function properly.

These cookies and services collect and process data for statistics and analytics and thus enable further improvements of this website for users. Google Analytics and Google Adwords Conversion are used for this purpose. You will find a detailed description of such use in our Privacy Policy.

Save settings ACCEPT ALL AND CLOSE Data protection settings