Mounting the APA design cover

The APA design cover is secured to the top and bottom unit face end with 2 sliders.

CAUTION Risk of cuts if glass parts are damaged.

Glass parts of operating unit are fragile. Take care when installing/removing. Observe safety instructions.

  1. Check that operating unit is placed and mounted correctly and that plug connection is tight.
  2. Place APA design cover at bottom on guide in RSAP metal shell sheet and secure with the two sliders.
  3. Ensure that the cover is also correctly engaged.
  1. Affix the enclosed MAICO sticker on the bottom right of the design/glass cover.