Axial wall-mounted fan

DZF 30/6 B

Article number: 0085.0101
Manufacturer: MAICO
Axial wall fan for recessed-mounted installation, DN 300, three-phase AC
Application examples: Changing room, Foreman's office, Restaurant, Garage, Fitness room
DZF 30/6 B IM0009978.PNG Axial wall fan for recessed-mounted installation, DN 300, three-phase AC

Characteristic curve

DZF 30/6 B - Characteristic curve

Dimensioned drawing

DZF 30/6 B - Dimensioned drawing [mm]

  1. Protective grille on intake side
  2. Air flow direction with air drawn across the motor

Technical data

DZF 30/6 B - Technical data

Article DZF 30/6 B
Model Wall sleeve
Air flow volume 1.150 m³/h
Rotating speed 930 1/min
Impeller type axial
Speed controllable
Reversing capacity
Type of voltage Three-phase AC
Rated voltage 400 V
Frequency 50 Hz
Nominal output 70 W
Power consumption 70 W
Inom 0,18 A
Imax 0,18 A
Degree of protection IP 55
Insulation class B
Mains cable 7 / 1,5 mm²
Installation site Wall / Ceiling
Type of installation Recessed-mounted
Installation position horizontal / vertical
Material Sheet steel, galvanised
Weight 6,4 kg
Nominal size 300 mm
Width 365 mm
Height 365 mm
Depth 300 mm
Airstream temperature at nominal current 60 °C
Airstream temperature at IMax -20 °C up to 60 °C
Packing unit 1 piece
Range C
EAN 4012799851011
Article number 0085.0101

 

63 Hz

125 Hz

250 Hz

500 Hz

1 kHz

2 kHz

4 kHz

8 kHz

Total

LWA7, S5 (dB(A))

25

45

54

57

52

51

45

31

60

LWA7= housing and free inlet sound power level in dB.

Product description

Productdescription

DZF 30/6 B

short description

Axial wall fan for recessed-mounted installation, DN 300, three-phase AC

Product description

Features

  • For recess mounting.
  • Can be fitted in any position.
  • Wall sleeve made of galvanised sheet steel.
  • 8-blade impellers made of glass-fibre filled polyamide. Dynamically balanced at two levels, in accordance with performance level 6.3, DIN ISO 1940, Part 1.
  • Protective grille made of plastic on the intake side, pearl white, protection against accidental contact in accordance with DIN EN 13857.

Air flow direction

  • The following illustration shows the air flow direction.
  1. Air flow direction A: With air drawn across the motor, standard
  2. Air flow direction B: With air blown across the motor, available on request
  3. Rotational direction
  4. Reversing mode: The volumetric flow is reduced by approx. 35 % with abnormal air flow direction.

Motor

  • Asynchronous motor.
  • Reversible. Exception: Fans with shaded-pole motors (...-E).
  • Not suitable for ventilating steam-saturated air.

Three-phase AC motor

  • DZF model series.
  • Rated voltage 400 V, 50 Hz.
  • IP 55 degree of protection. Exception DZF... D IP 54.
  • Thermal overload protection as a standard feature. Exception: DZF .../D.
  • Potential-free terminal connections, which must be connected to e.g. an MV 25 protective motor switch or the control circuit of a contactor.

Electrical connection

  • To terminal block under the motor cover.

Safety instructions

  • The fan can be operated only if the protection against accidental contact with the impeller is guaranteed to be in accordance with DIN EN ISO 13857 for fans with a free inlet.

Special versions

  • The following special versions are available at extra cost on request:
    • Special voltages and frequencies.
    • Single-phase motors with thermal contacts or PTC thermistor, with potential-free terminal connections.
    • Impellers made of aluminium.
  • Information on operation at temperatures occasionally below -20°C available upon request.
  • If operating with frequency converters, the factory must be consulted.
  • Feasibility must be checked in each case.

Table of contents

Wiring diagram

DZF 30/6 B - Wiring diagram

DZQ/DZS/DZF..B standard (right-hand operation, 1 speed)

SC - Protection contact

TK - Thermal contact



DZQ/DZS/DZF..B standard (left-hand operation, 1 speed)

SC - Protection contact

TK - Thermal contact













Predecessor - successor

Notes
Inquiry
Product comparison
The wish list option allows you to make a note of all the products you are interested in. You can change your wish list as often as you want to. You can change the quantity and item position of the products, go back to the product page, download product data sheets, delete items and mark products as optional. You can save your wish list to your computer and then call it up again at a later time to make more changes, if required. Using the list, you can then download the tender text for all the products you have saved to the list, create an enquiry or compare products.
Assort Product type Name Art. No. PDF Range List price* (EUR) Quantity Optional Total gross amount (EUR)
There are no products on the list
Save wish list on local computer
Load wish list from local computer

Search

Here you can search for products, documents, contents pages etc.

Our website uses cookies in order to provide you an optimal service. OK

Acknowledgements Data protection