Frequency converter

MFU 19

Article number: 0157.1220
Manufacturer: MAICO
Frequency converter for controlling fan speed, recommended motor power of 7.5 kW

Product data sheet
MFU 19 IM0011841.PNG Frequency converter for controlling fan speed, recommended motor power of 7.5 kW

Characteristic curve

Dimensioned drawing

Technical data

MFU 19 - Technical data

Article MFU 19
Rated voltage 3 x 380 V to 480 V (+/- 10%)
Frequency 50 Hz/60 Hz
Inom 19 A
Recommended motor power 7.500 W
Degree of protection IP 54
Housing material Sheet steel, galvanised
Colour Light grey, similar to RAL 7035
Weight 21,87 kg
Weight including packaging 23,85 kg
Width 260 mm
Height 710 mm
Depth 300 mm
Width with packaging 415 mm
Height with packaging 740 mm
Depth with packaging 355 mm
Ambient temperature -10 °C up to 50 °C
Packing unit 1 piece
Range C
GTIN (EAN) 4012799572206
Article number 0157.1220

Accessories of

MFU 19 - Accessories of

is a general accessory of

Product type Name Art. No. Price*(EUR) Action
Axial fan DAS 90/4 0083.0859 on request
  • On the notes
Axial fan DAS 125/6 0083.0866 on request
  • On the notes

Product description

Productdescription

MFU 19

short description

Frequency converter for controlling fan speed, recommended motor power of 7.5 kW

Product description

  • Frequency converter for controlling fan speed in continuously variable manner.
  • With mains filter and extra terminal block.
  • With motor protection switch via thermal contact or PTC thermistor.
  • Control inputs: electrically isolated, PLC-compatible, freely programmable.
  • Nominal value inputs: 0 - 5 V, 0 - 10 V, 0(4) - 20 mA with voltage and current offset calibration function.
  • Nominal value output: 1 analogue output 0 - 10 V.
  • Digital inputs: 6, some of which are freely programmable.
  • Signal outputs: 2, some of which are freely programmable.
  • Digital outputs: 2 potential-free outputs for fault and operating messages (changeover contact).
  • Connections using metric screw connections 2 x PG 12, 2 x PG 16.
  • Preset in the factory for 15 programmable fixed speeds.
  • Service life of around 80 000 hours at 80 to 85 % nominal load.
  • Suitable for DSK, DAS, DSQ, EDR 56/63/71 and all DZ... fans with phase isolation (special version).
  • ST EC 010 can also be used for remote maintenance.

Table of contents

Wiring diagram

MFU 19 - Wiring diagram

Predecessor - successor

Notes
Inquiry
Product comparison
The wish list option allows you to make a note of all the products you are interested in. You can change your wish list as often as you want to. You can change the quantity and item position of the products, go back to the product page, download product data sheets, delete items and mark products as optional. You can save your wish list to your computer and then call it up again at a later time to make more changes, if required. Using the list, you can then download the tender text for all the products you have saved to the list, create an enquiry or compare products.
Assort Product type Name Art. No. PDF Range List price* (EUR) Quantity Optional Total gross amount (EUR)
There are no products on the list
Save wish list on local computer
Load wish list from local computer

On this website, technologies such as cookies and measurements of reach (targeting and tracking) are used (services). This means that personal information such as the IP address and browser information is processed to continuously improve our website as well as to display to you customised content that corresponds to your individual interests. You may of course influence the use of this information through the settings you choose. The settings you have chosen are stored in a necessary selection cookie. With the exception of the selection cookie mentioned above, technically non-essential cookies and measurements of reach are only used if you provide permission in advance by clicking “ACCEPT ALL AND CLOSE”. Details and options for customising your consent can be found under Data protection settings.

Here you can select a variety of different categories of services or cookies. By activating the corresponding “Statistics & analytics” checkbox and confirming “Save settings”, you can give your informed consent to the use of cookies for customisation purposes. At the bottom of the website under “Data protection settings”, you can change or revoke your consent and settings for the individual services at any time with effect for the future.

Necessary cookies are absolutely necessary for the operation of the website. Without these cookies, the website would not function properly.

These cookies and services collect and process data for statistics and analytics and thus enable further improvements of this website for users. Google Analytics and Google Adwords Conversion are used for this purpose. You will find a detailed description of such use in our Privacy Policy.

Save settings ACCEPT ALL AND CLOSE Data protection settings