Centrifugal roof fan

MDR 22 EC

Article number: 0087.0022
Manufacturer: MAICO
Centrifugal roof fan with EC motor, DN 224
Application examples: Workplace, Production facility, Industrial building, Assembly hall, Commercial premises
Product data sheet
MDR 22 EC IM0019327.PNG Centrifugal roof fan with EC motor, DN 224
Back
  • On the notes
MDR 18 EC
MDR 22 EC
MDR 25 EC
MDR 31 EC
MDR 35 EC
MDR 40 EC
MDR 45 EC
MDR-PG 18 EC
MDR-PG 22 EC
MDR-VG 25 EC
MDR-VG 31 EC

Characteristic curve

MDR 22 EC - Characteristic curve

  1. Auxiliary characteristics curves for control voltage 2 - 10 V

Dimensioned drawing

MDR 22 EC - Dimensioned drawing [mm]

  1. Clear width
  2. External duct diameter
  3. Number of holes

Technical data

MDR 22 EC - Technical data

Article MDR 22 EC
Air flow volume 2.440 m³/h
Air volumenom 1.390 m³/h / in opt. efficiency
Pressure pfs, nom 520 Pa / in opt. efficiency
Rotating speed nnom 2.860 1/min / in opt. efficiency
Impeller type radial
Speed controllable ✔
Reversing capacity −
Type of voltage Alternating current
Rated voltage 230 V
Frequency 50 Hz
Nominal output 407 W / in opt. efficiency
Inom 1,79 A / in opt. efficiency
Imax 1,9 A
Degree of protection IP X5
Insulation class F
Pole-changeable −
Installation site Roof
Installation position vertical
Weight 25,66 kg
Weight including packaging 28,15 kg
Swivellable −
Nominal size 224 mm
Width 550 mm
Height 437 mm
Depth 550 mm
Width with packaging 590 mm
Height with packaging 460 mm
Depth with packaging 590 mm
Airstream temperature at IMax -25 °C up to 60 °C
Temperature class F
Packing unit 1 piece
Range E
GTIN (EAN) 4012799870227
Article number 0087.0022
Article MDR 22 EC
Total efficiency η 49,3 %
Efficiency level N 77,4
Year of manufacture see rating plate
Manufacturer’s name / official registration number / manufacturer's place of establishment Maico Elektroapparate-Fabrik GmbH / Freiburg registration court, HRB 601233
Art. No. 0087.0022
PBEP / Air volumeBEP / Pfs, BEP 0,407 kW / 1.390 m³/h / 520 Pa
Information about dismantling and disposal see mounting instructions
Information about installation, operation and repairs see mounting instructions
Objects used to measure efficiency which are not described by the measurement category -
Sound power levelLWA5 79 dB

 

63 Hz

125 Hz

250 Hz

500 Hz

1 kHz

2 kHz

4 kHz

8 kHz

Total

LWA5, 2 V (dB(A))

11,2

23,1

25,7

43,6

52,7

40,7

27,7

26,6

52,9

LWA5, 4 V (dB(A))

25,6

38,9

46

49,1

51,9

60,2

51,7

39,8

61,1

LWA5, 6 V (dB(A))

34,8

47,5

54,8

56

59,9

61,1

67,4

51,7

68,8

LWA5, 8 V (dB(A))

41,3

53,3

63,1

64,4

66,7

66,7

70,7

66,8

74,4

LWA8, 2 V (dB(A))

9,3

34,9

32

46,7

50,9

39,1

28,9

29,4

52,4

LWA8, 4 V (dB(A))

27,3

42,5

48,7

51,6

54,6

59,4

50,4

41,2

61,2

LWA8, 6 V (dB(A))

36,7

52,5

58,6

60,9

64,2

64

65,3

52,7

69,9

LWA8, 8 V (dB(A))

43,6

59,7

65,5

69,2

71,4

71,1

69,8

67

76,8

LWA5= free inlet sound power level in dB.

LWA8= housing and free outlet sound power level in dB.

Product description

Productdescription

MDR 22 EC

short description

Centrifugal roof fan with EC motor, DN 224

Product description

Standard model

  • Intelligent control options via 0-10 V, PWM or Modbus.
  • External switching ON/OFF possible.
  • Status of service switch, potential-free contact (can be loaded up to 230 V/2A).
  • Motor fault message, potential-free contact (can be loaded up to 230 V/2A).

Features

  • Attractive housing made from galvanised sheet steel.
  • Galvanized protective grille on the discharge side, protection against accidental contact in accordance with EN ISO 13857.
  • Cover can be easily removed for cleaning purposes.
  • Automatic fault message.
  • Integrated service switch.
  • IP X5 degree of protection.
  • Sturdy eyebolts enable transport by crane.
  • Conforms with DIN EN 60204-1 and DIN EN 60335-1.

Control

  • Intelligent control options via Modbus, 0-10 V, PWM or pressure control.
  • Output of fault messages.
  • Pressure sensor installed in fan housing of PG variants ready for use.

Motor and impeller

  • EC motor, 230 V, 50 Hz, or 400 V, 50 Hz.
  • Overload protection as standard.
  • No motor protection measures needed.

Electrical connection

  • Common mains connection (230 V, 50 Hz or 400 V, 50 Hz) for fan and control.
  • Mains connections each 3 x 1.5 mm² (or 7x 1.5 mm³) of type NYM-J.
  • Control cable from 0.5 mm².
  • Connection terminals for speed control by means of 0-10 V, PWM or potentiometer.
  • Connection terminal for status speed output (MDR 22 EC, MDR 25 EC, MDR 31 EC).
  • Connection terminal for Modbus output (MDR 22 EC, MDR 25 EC, MDR 31 EC.
  • Connection terminal for fault messages.

Table of contents

Wiring diagram

MDR 22 EC - Wiring diagram

L/L1, N/N1 - 230V/50Hz power supply

PE ­ PE conductor

10 V / GND - 10 VDC power supply

E1 - Control voltage Speed input (0-10V)

D1 - Enabling contact (10V)

A1 - Speed output

A/B - MODBUS

11/14 - Potential-free contact Motor

33/34 - Potential-free contact Repair switch

1/2 - Contact not assigned (with connection of a pressure control)

PWM - PWM speed control

DP - Speed control potentiometer

ODA - Option speed evaluation

n- speed (example: 10 Hz x 60 = 600 rpm, open collector)

OSM - Fault message option

SM M – Motor fault signal

SM REP - Fault message Repair switch

OMB - Option Modbus (baud rate = 19200, bits = 8, parity = EVEN, stop bits = 1, handshake = none)

REP - Repair switch

KK - Terminal box

M - Motor



MDR 18 / 22 / 25 / 31 with pressure and temperature control system EAT EC

KK - terminal box



Predecessor - successor

MDR 22 EC - Predecessor

Product type Name Art. No. Action
Centrifugal roof fan DRD 22 EC Remaining parts 0087.0171

Notes
Inquiry
Product comparison
The wish list option allows you to make a note of all the products you are interested in. You can change your wish list as often as you want to. You can change the quantity and item position of the products, go back to the product page, download product data sheets, delete items and mark products as optional. You can save your wish list to your computer and then call it up again at a later time to make more changes, if required. Using the list, you can then download the tender text for all the products you have saved to the list, create an enquiry or compare products.
Assort Product type Name Art. No. PDF Range List price* (EUR) Quantity Optional Total gross amount (EUR)
There are no products on the list
Save wish list on local computer
Load wish list from local computer

On this website, technologies such as cookies and measurements of reach (targeting and tracking) are used (services). This means that personal information such as the IP address and browser information is processed to continuously improve our website as well as to display to you customised content that corresponds to your individual interests. You may of course influence the use of this information through the settings you choose. The settings you have chosen are stored in a necessary selection cookie. With the exception of the selection cookie mentioned above, technically non-essential cookies and measurements of reach are only used if you provide permission in advance by clicking “ACCEPT ALL AND CLOSE”. Details and options for customising your consent can be found under Data protection settings.

Here you can select a variety of different categories of services or cookies. By activating the corresponding “Statistics & analytics” checkbox and confirming “Save settings”, you can give your informed consent to the use of cookies for customisation purposes. At the bottom of the website under “Data protection settings”, you can change or revoke your consent and settings for the individual services at any time with effect for the future.

Necessary cookies are absolutely necessary for the operation of the website. Without these cookies, the website would not function properly.

These cookies and services collect and process data for statistics and analytics and thus enable further improvements of this website for users. Google Analytics and Google Adwords Conversion are used for this purpose. You will find a detailed description of such use in our Privacy Policy.

Save settings ACCEPT ALL AND CLOSE Data protection settings
Data protection