Aeronom room air system

AWP 150

No longer available for delivery
Article number: 0095.0052
Manufacturer: MAICO
Exhaust air heat pump, for low-energy houses with a living space up to approx. 130 m²
Application examples: 3-litre house, Apartment
Product data sheet
AWP 150 IM0006932.PNG Exhaust air heat pump, for low-energy houses with a living space up to approx. 130 m²

Characteristic curve

AWP 150 - Characteristic curve Fan characteristic curve at maximum speed

AWP 150 - Characteristic curve Heating characteristic curve

  1. Step 1
  2. Step 2
  3. Step 3

AWP 150 - Characteristic curve

I - Qh = 30 kWh/(m2a)

II - Qh = 40 kWh/(m2a)

III- Qh = 50 kWh/(m2a)

IV - Qh = 60 kWh/(m2a)

Heating system

Transfer: 2 K radiant panel heating with individual room control

Storage: no storage

Distribution: heated, interior, 35°C / 28°C , controlled pump

Generation: Exhaust air - water heat pump

Heated drinking water

Storage: Indirectly heated storage tank within thermal sleeve

Distribution: Central within the building, without circulation, horizontal distribution within the thermal sleeve

Generation: Drinking water heating pump, exhaust air - drinking water and direct, electrical and solar panels

Taken into account: 12.5 kWh/(m2a)

Ventilation

Transfer: Ventilation system with an exhaust air temperature of less than 20°C

Distribution: Exhaust air system with supply air elements, DC fans

Generation: -

Dimensioned drawing

AWP 150 - Dimensioned drawing [mm]

  1. Outgoing air (can be mounted if desired)
  2. Exhaust air
  3. Condensation drain
  4. Filling and drainage cock for heater
  5. Heater return flow, heating circuit 1
  6. Heater forward flow
  7. Heater return flow, heating circuit 2
  8. Feed-throughs for electric cables
  9. Hot water
  10. Circulation
  11. Solar heat exchanger, forward flow
  12. Solar heat exchanger, return flow
  13. Cold water

Technical data

AWP 150 - Technical data

Article AWP 150
Air flow volume 50 m³/h / 200 m³/h
Minimum air flow volume 125 m³/h
Maximum pressing 270 Pa
Power module rated voltage 400 V
Control unit rated voltage 230 V
Maximum power consumption 8.600 W
Power consumption of fan 50 W
Imax 17,5 A
WP starting current 10 A
Degree of protection IP 20
Electrical reheating and compressor fuse protection 20gl A
Transformer and control fuse protection 16gl A
Housing material Sheet steel, galvanised
Colour Silver grey
Weight (empty) 187 kg
Weight (filled) 490 kg
Weight including packaging 214 kg
Storage tank size 303
Ventilation ducts connection diameter 160 mm
Heating connection diameter 22 mm (outside)
Hot water connection diameter 22 mm (outside)
Circulation connection diameter 1/2 (outside)
Connection diameter of condensation drain 12 (hose)
Width 702 mm
Height 1.990 mm
Depth 780 mm
Width with packaging 770 mm
Height with packaging 2.100 mm
Depth with packaging 800 mm
Heater power rating (electr. hot water re-heating) 1.500 W
Heater power rating (heat pump) 1.500 W
Temperature distribution with only WP operation 3 K
Minimum heating volume flow 400 l/h
WP working index, in accordance with EN 255, Part 3 (COP(1)) 4,1
WP power index, in accordance with EN 225, Part 2 (COP) 4
Heat pump Air/water
WP heating power and electrical reheating 8.100 W
Coolant R 134 a
Capacity (coolant) 1.000 g
Hot water heat-up time from 15°C to 55°C with WP 10,1 h
Available pressure difference at the circulation pump, at speed level 1 0,02 MPa / 0,04 MPa / 0,05 MPa
Permitted cooling circuit operating pressure 2,34 MPa
Permitted heating circuit operating pressure 0,3 MPa
Permitted hot water operating pressure 0,6 MPa
Exhaust air lower application limit 15 °C
Storage tank size 303
Packing unit 1 piece
Range K
GTIN (EAN) 4012799950523
Article number 0095.0052

Accessories

AWP 150 - Accessories

Specific accessories

Product type Name Art. No. Price*(EUR) Action
Internal grille, adjustable AZE 100 No longer available for delivery 0059.0959 on request
  • On the notes
Outside air opening ZE 45 F white No longer available for delivery 0152.0044 on request
  • On the notes
Supply air element ZE 10 T No longer available for delivery 0152.0048 on request
  • On the notes
Supply air element ZE 10 IB No longer available for delivery 0152.0046 on request
  • On the notes
Contact sensor AVF 6 No longer available for delivery 0095.0521 on request
  • On the notes
Remote control FE 7 No longer available for delivery 0095.0525 on request
  • On the notes

General accessories

Product description

Productdescription

AWP 150

short description

Exhaust air heat pump, for low-energy houses with a living space up to approx. 130 m²

Product description

Features

  • The AWP removes heat from the exhaust air using the air-water heat pump and transfers it to the heating system and the water heater.
  • In this way, a large part of the existing free heat energy is recovered and used in an environmentally friendly manner.
  • At the same time, fresh outside air flows through the supply air valves into the living areas without draughts.
  • A 300-litre tank continually provides hot water.
  • With the AWP...S range, the connections for solar panels are already in place, 2 heating circuits are possible. solar control is integrated.
  • The heat supply for heating is weather-controlled.
  • The fully automatic control ensures an optimum air supply.
  • A large number of ventilation programmes can be called up at the press of a button: Day and night operation, party setting, etc.
  • In heating operation, the outgoing air temperature is only between 0°C and 3°C.
  • There is a residual backup with 6 x 1.1 kW of heater power rating integrated in the heating duct, to allow for power peaks on particularly bad winter days.
  • An integrated electric heating element handles the residual backup in the hot water heating.
  • The system is already so well equipped that only the exhaust air duct system with exhaust air valves, sound absorbers, filter box, supply air elements, overflow openings, safety group hot water, expansion tank and the optional solar panels have to be provided separately.
  • Enquire about special tariffs from your utility company.
  • Please request project management planning documents.

Table of contents

Wiring diagram

AWP 150 - Wiring diagram

Wiring diagram for AWP ... and AWP ... S.


B1 - forward flow sensor

B2 - hot water sensor

B3 - return flow sensor

B4 - defrost sensor

C1 - operating capacitor

E1 - hot water heating element

E2 - heating system heating element

F1 - STB heating

F2 - STB hot water

F3 - pressure limiter

F4 - mains power unit protection

F5 - Klixon compressor

H1 - HD fault signal

K1 - compressor relay

K2 - hot water heating element relay

K3 - relay for switching between hot water and heating system

K4 - relay for heating step 3 of heating system

K5 - relay for heating step 2 of heating system

K6 - relay for heating step 1 of heating system

M1 - compressor.

M2 - circulation pump

M3 - exhaust fan

T1 - mains power unit

V1 - heating system solenoid valve

V2 - hot water solenoid valve

X1 - mains connections

X2 - external extra-low voltage

X3 - external mixer circuit

Z1 - noise suppression device (throttle)

Z2 - noise suppression device (mains)



Predecessor - successor

Notes
Inquiry
Product comparison
The wish list option allows you to make a note of all the products you are interested in. You can change your wish list as often as you want to. You can change the quantity and item position of the products, go back to the product page, download product data sheets, delete items and mark products as optional. You can save your wish list to your computer and then call it up again at a later time to make more changes, if required. Using the list, you can then download the tender text for all the products you have saved to the list, create an enquiry or compare products.
Assort Product type Name Art. No. PDF Range List price* (EUR) Quantity Optional Total gross amount (EUR)
There are no products on the list
Save wish list on local computer
Load wish list from local computer

On this website, technologies such as cookies and measurements of reach (targeting and tracking) are used (services). This means that personal information such as the IP address and browser information is processed to continuously improve our website as well as to display to you customised content that corresponds to your individual interests. You may of course influence the use of this information through the settings you choose. The settings you have chosen are stored in a necessary selection cookie. With the exception of the selection cookie mentioned above, technically non-essential cookies and measurements of reach are only used if you provide permission in advance by clicking “ACCEPT ALL AND CLOSE”. Details and options for customising your consent can be found under Data protection settings.

Here you can select a variety of different categories of services or cookies. By activating the corresponding “Statistics & analytics” checkbox and confirming “Save settings”, you can give your informed consent to the use of cookies for customisation purposes. At the bottom of the website under “Data protection settings”, you can change or revoke your consent and settings for the individual services at any time with effect for the future.

Necessary cookies are absolutely necessary for the operation of the website. Without these cookies, the website would not function properly.

These cookies and services collect and process data for statistics and analytics and thus enable further improvements of this website for users. Google Analytics and Google Adwords Conversion are used for this purpose. You will find a detailed description of such use in our Privacy Policy.

Save settings ACCEPT ALL AND CLOSE Data protection settings